Saint-Gobain
SAINT-GOBAIN JOINLEADER (HANGZHOU) NEW MATERIALS CO., LTD.
CATEGORIES
CATEGORIAS
JAN246 THREAD LOCKER
lt is a general purpose threadlocker that provides a medium strength bond. It works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils
JAN241 THREAD LOCKER
It is a medium-strength, fast-curing structural adhesive.It cured under the condition of air isolation between closely matched metal surfaces to prevent loosening and leakage due to impact and vibration
JAN262C THREAD LOCKER
The product is a general purpose, medium to high strength, thixotropic methacrylate-based adhesive. It is anaerobicly solidified between closely fitting metal surfaces, which can prevent loosening and leakage caused by impact and vibration.The thixotropic properties reduce the migration of the liquid product after it is applied to the substrate.
JAN262E THREAD LOCKER
The product is a medium-viscosity, thixotropic, high-strength anaerobic adhesive, used for permanent locking and sealing of threaded fasteners.It solidifies between the metal surfaces, and prevents loosening and leakage due to impact and vibration.The thixotropic properties reduce the migration after it is applied to the substrate.
JAN242 THREAD LOCKER
It is an anaerobic adhesive with thixotropic viscosity, medium strength, general use, and suitable for locking and sealing of detachable threaded fasteners.It is anaerobicly solidified between closely fitting metal surfaces, which prevent loosening and leakage caused by impact and vibration.Good thixotropy can effectively avoid the migration of liquid products on the application surface.It meets the requirements of JB/T 7311-2008.
JAN271 THREAD LOCKER
It is a high-strength, low-viscosity, methacrylate-containing Thread Assembly adhesive.It can be used to lock and seal threaded fasteners and can be easily removed using standard hand tools.It is suitable for application scenarios such as adjustable fastening screws, small diameter or long engaging length fasteners, easy removal and no shearing.It meets the requirements of JB/T 7311-2008.
JAN263 THREAD LOCKER
The product is a high-strength Thread Assembly glue, which is suitable for permanent locking and sealing of threaded fasteners.The product cures when confined in the absence of air between close fitting metal surfaces. It is effective on active metals (such as brass and copper) and passive substrates (such as stainless steel and plated surfaces).
JAN272 THREAD LOCKER
It is a high-strength, medium-viscosity Thread Assembly glue used for permanent locking and sealing of threaded fasteners under high temperature conditions.The product is anaerobicly solidified between closely fitting metal surfaces, which can prevent loosening and leakage caused by impact and vibration.Due to its enhanced chemical properties, it still has excellent performance at 150C higher temperature than other Thread Assembly products.It can be connected to be exposed to temperatures up to 450F.It meets the requirements of JB/T 7311-2008.
JAN270 THREAD LOCKER
The product is a high-strength, low-viscosity, methacrylate-containing anaerobic adhesive.It is designed for permanent locking and sealing of threaded fasteners.It solidifies between the metal surfaces, and prevents loosening and leakage due to impact and vibration.It meets the requirements of JBZQ 4191-2006, HG/T3737-2004, ASTM D5363-16.
JAN554 PIPE THREAD SEALING
It is a red, medium viscosity, high strength methacrylate liquid thread sealant.It provides maximum solvent protection for threaded pipe joints and pipes with a diameter of less than 50 mm.It can replace non-hardened compounds, lead monoxide, glycerin, and sealing tape.It is especially suitable for the sealing of refrigerant pipes.
JAN569 PIPE THREAD SEALING
It is a brown, low-viscosity methacrylate liquid pipe thread sealant.It is designed to lock and seal metal pipes and pipe joints. After curing, the product can prevent loosening and leakage caused by impact and vibration.The product has excellent solvent resistance and it can withstand temperatures of 150C.The product does not shrink after curing, it can effectively block moisture and protect the bonding area from corrosion.
JAN680 THREAD ASSEMBLY COMPOUND
It is a high-strength, low-viscosity holding adhesive that can be used to bond cylindrical assemblies, especially in scenarios where low viscosity is required.he product is anaerobicly solidified between closely fitting metal surfaces, which can prevent loosening and leakage caused by impact and vibration.
JAN962 THREAD ASSEMBLY COMPOUND
This product is a medium-viscosity bowl-shaped holding anaerobic adhesive, used for sealing and holding bowl plugs.It is anaerobicly solidified between closely fitting metal surfaces, which can prevent loosening and leakage caused by impact and vibration.Can withstand slight pollution of various oils. Such as cutting fluid, lubricating fluid, anti-corrosion fluid and protective fluid.
JAN326S ANAEROBIC STRUCTURAL ADHESIVE
The product is a structural adhesive that can provide the strength of epoxy resin and the curing speed of instant adhesive.It is suitable for fast fixing conditions and also used for bonding rigid materials.It has good impact resistance, vibration resistance, solvent resistance, and temperature resistance of 120C.
JAN319 ANAEROBIC STRUCTURAL ADHESIVE
Permeation grade, fast curing, specially designed for bonding of magnetic steel
JAN3271 ANAEROBIC STRUCTURAL ADHESIVE
The product is a structural adhesive that can provide the strength of epoxy resin and the curing speed of instant adhesive.It is suitable for fast fixing conditions and also used for bonding rigid materials.
JAN326 ANAEROBIC STRUCTURAL ADHESIVE
The product is a structural adhesive that can provide the strength of epoxy resin and the curing speed of instant adhesive.It is suitable for fast fixing conditions and also used for bonding rigid materials.It has good impact resistance, vibration resistance, solvent resistance, and temperature resistance of 120C.
JAN574 FLANGE SEALING
The product cures when confined in the absence of air between close fitting metal surfaces. The thixotropic nature of reduces the migration of liquid product after application to the substrate. TEK 574 seals close fitting joints between rigid metal faces and flanges.
JAN518 FLANGE SEALING
It is a single component, medium strength, anaerobic sealant which cures when confined in the absence of air between close fitting metal surfaces. ,It provides robust curing performance. It not only works on active metals (e.g. mild steel) but also on passive substrates such as aluminum with a low copper content. , It cures in the presence of minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids and cleaners containing surfactants and corrosion inhibitors.
JAN510 FLANGE SEALING
It solidifies under the conditions of tightly matching the metal surface and air isolation. It can provide immediate, low-pressure sealing. It can prevent loosening and leakage caused by impact and vibration. It is a pink, high-viscosity, medium-strength high-temperature resistant anaerobic adhesive.
JAN515 FLANGE SEALING
The product, which cures anaerobically, is suitable for gaps up to 0.25 mm. It is a medium strength , medium cure speed, methacrylate-based industrial gasketing product designed for machined, rigid metal flanges.
JAN545 PIPE THREAD SEALING
It is a pipe thread sealant designed for locking and sealing of metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces. It is specially formulated to offer high lubricity for easy assembly and removal.
JAN577 PIPE THREAD SEALING
It has excellent chemical and thermal resistance and offers less migration of liquid product after application. The product provides an instant, low-pressure seal for metal pipes and fittings. It will not creep, shrink or shred. , The product cures when confined in the absence of air between close fitting metal surfaces. , Fills the space between threaded parts and seals and locks at the same time. , It is medium-strength, general purpose thread sealant for straight/straight and straight/taper threads and fittings.
JAN567 PIPE THREAD SEALING
The product cures when confined in the absence of air between close fitting metal surfaces. , It is an off-white, low disassembly strength methacrylate thread sealant, ideal for sealing coarse threads up to M80/R3”.
JAN290 THREAD LOCKER
The product can also fill porosities in welds, castings and powdered metal parts. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It is a liquid medium/high-strength threadlocker designed for the locking and sealing of threaded fasteners. , Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application.
JAN222 THREAD LOCKER
The product works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces. It is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. , It is proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids. Good on low-strength metals which could fracture during disassembly, e.g. aluminum or brass.
JAN243 THREAD LOCKER
It works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluid. It is a general purpose threadlocker that provides a medium strength bond.
JAN262 THREAD LOCKER
It is anaerobicly solidified between closely fitting metal surfaces, which can prevent loosening and leakage caused by impact and vibration. The thixotropic properties reduce the migration of the liquid product after it is applied to the substrate. The product is a general purpose, medium to high strength, thixotropic methacrylate-based adhesive.
JAN277 THREAD LOCKER
Can tolerate slight contaminations of industrial oils. , Fluoresces to allow monitoring. Suited to large threads. , It is a red, high strength, high viscosity, methacrylate-based threadlocking adhesive.
JAN660 THREAD ASSEMBLY COMPOUND
It is designed for the bonding of cylindrical fitting parts, particularly where bond gaps occurs without the need for remachining. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. JAN660 exhibits excellent gap cure characteristics and is also suitable for Thread Assembly shims.
JAN641 RETAINING COMPOUND
It meets the requirements of JBZQ 4191-2006, HG/T3737-2004, ASTM D5363-16. The product is a medium viscosity, controllable strength holding adhesive that can be used to bond cylindrical assemblies。 , It is anaerobicly solidified between closely fitting metal surfaces, which can prevent loosening and leakage caused by impact and vibration.
JAN620 RETAINING COMPOUND
It is a retaining compound designed for the bonding of cylindrical fitting parts. , The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.
JAN648 RETAINING COMPOUND
It prevents loosening and leakage from shock and vibration. TEK 648 is a green, fluorescent, low viscosity, high strength, urethane methacrylate acrylic, anaerobic retaining compound designed for bonding cylindrical fitting parts. It provides robust curing performance
JAN638 RETAINING COMPOUND
It is designed for the bonding of cylindrical fitting parts, particularly with narrow bond gaps approaching 0.25 mm. , The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. , It not only works on active metals but also on passive substrates, exhibiting robust cure performance.
JAN603 RETAINING COMPOUND
It is designed for bonding cylindrical assembly parts, especially sintered bearings and applications that cannot always keep the surface clean. It has high oil resistance. It solidifies when the air is sealed between closely fitting metal surfaces to prevent loosening and leakage caused by impact and vibration. It is a green, low viscosity, high strength holding glue.